生长曲线模型中回归系数阵的极大似然估计的精确分布

对于生长曲线模型,基于理论发展和应用效果的考虑,本文引入了Gauss型误差．在此误差下,本文研究了模型中回归系数阵的极大似然估计的精确分布,求出了此分布的密度和特征函数．     

利用谱线宽度测人发中的微量元素

通过实验证明了可以利用谱线宽度做永久工作曲线用于光谱定量分析。给出了用于测量人发中微量元素Ｃｕ，Ｚｎ，Ｆｅ和Ｃａ的永久工作曲线，利用这些工作曲线对实际样品进行了测定，所得结果与用ＩＣＰ－ＡＥＳ测得的结果相吻合。     

On the reliability of unsaturated hydraulic conductivity calculated from the moisture retention curve

In comparison with direct measurements of unsaturated hydraulic conductivity, the methods of calculations from the moisture retention curve are attractive for their fast and simple use and low cost. These are the main reasons for their increasing use, mainly in spatial variability studies. On the other hand, it is known that their applicability is limited. The possibility of the use of the retention curve to indirectly determine hydraulic conductivities is analyzed as follows. The theoretical derivation of the relationK(h) – (h) is briefly discussed with regards to potential sources of inaccuracy. The sensitivity of the algorithm forK(h) calculation is studied as a response to possible inaccuracies in the retention curve determination. Conclusions about the usability of calculated hydraulic conductivities are drawn.     

钢中Si、Mn的电子探针定量分析与标样

采用特制的Fe-Si、Fe-Mn合金系列标样，用电子探针测定了钢或铁基合金中低含量的Si和Mn元素、与用纯元素作标样、经ZAF修正的结果相比较，提高了分析准确度．     

Averaged molecular weight of complex mixtures as determined by rapid measurements of diffusion

Summary The concept of a diffusion-averaged molecular weight, M_d is presented, and M_d is defined for polydisperse samples. It is shown via oligostyrene mixtures that M_d can be determined in 20 minutes with common chromatographic equipment. If M_d is measured and M_n or M_w is known, the polydispersity can be obtained.     

超临界水的性质及其在化学反应中的应用

介绍了水的热物理性质、结构性质、离子积、扩散系数和粘度等在超临界区域的特殊性，以及超临界水溶液在介电常数、偏摩尔体积、溶解性和极性等方面的特殊性质，并阐述了超临界水的这种特殊性在化学反应和环境治理中的应用。     

二组分混合物的最小流化特性 Ⅰ.混合/分离状态与最小流化空隙率

分析了二组分混合物的３种混合／分离状态及在完全混合时发生连续相转变的极限组成。提出一个判别非等密度体系混合／分离状态的法则与确定混合物空隙率简易可行的随意松散堆积方法。     

低共熔混合锂盐相图的绘制及应用

采用热分析法对不同组成的混合锂盐二元体系进行研究, 绘制了混合锂盐体系的步冷曲线和T-x相图, 结果表明体系均为具有最低共熔点的二元体系. LiOH-LiNO3、LiOH-LiCl、LiOH-Li2CO3及LiNO3-LiCl体系的最低共熔点分别为175.7、294.5、418.2及221.6 ℃. 利用低共熔混合物LiNO3-LiOH为锂盐与不同前驱体反应, 制备出了层状结构良好的锂离子电池正极材料LiNiO2、LiNi0.8Co0.2O2及LiNi1/3Co1/3Mn1/3O2. X射线衍射分析表明, 合成的材料具有规整的层状NaFeO2结构, 且XRD衍射峰强度之比I(003)/I(104)>2.0, 电性能测试表明, 在2.7-4.3 V(vs Li/Li+)的电压范围内进行0.1C倍率充放电, LiNiO2、LiNi0.8Co0.2O2、LiNi1/3Co1/3Mn1/3O2首次充电比容量分别达168.0、225.4、194.0 mAh·g-1, 放电比容量分别为138.4、165.8、157.7 mAh·g-1.     

Ternary surface complexes by theE(%)-pH curve method

A new method for the study of ternary surface complexes at liquid-solid interface, theE(%) -pH curve method, was proposed. Four types ofE(%)-pH curves, namely, phenomenon of left-right shifts of S-shaped curve, V-shaped curve, monodirection shift curve and X-shaped curve, were discovered. Correspondingly, apart from type (I) ternary surface complex and type (II) ternary surface complex , a new type of ternary surface complex was discovered. Project supported by the National Natural Science Foundation of China and the Fund of Doctoral Degree’s Spot.     

桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.